Possibly our most contemplated shape at hsFoil Boards has been the Wing board - Increased demand on boards that can do everything for  riders performing tricks, carve, racing on smaller lighter boards than ever have changed design trends dramatically over the last 12 months. 
 
Smaller volume boards that are flatter can still maintain excellent water speed for easy early takeoff, minimising landing shock and weight.  and so we've designed the new model 25/26 wing board range to deliver on all fronts for the intermediate to Advanced Wing Foiler. 
 
Integrating a small board feel into a big boards lift off qualities has led to a fresh design approach for maximum versatility and wind range.
 
For Peace of mind - Riders riding 'Strapped' and jumping constantly - the boards have double unistrand core stiffening around the mast box, as well as double strengthened HD foam core inserted around front and rear Foot strap inserts. Weve Given the Mast box a full Ibeam carbon construction  and a Double Bias carbon layup on all strike areas to prevent compression dents. 
 
The Wing Boards come in  three broadly customisable  sizes - - 70L, 75 80L,  all sit at 5'2 in length - just increasing in width increments of 1/2 Inch and thickness increments of 1/4 inch to achieve the volume sizes across the Litreage range.
 
For Advanced Wing Foilers, We would suggest you aim to go for a board around 5 litres smaller in volume than your riding already. 
 
Larger boards can be ordered - we have to then start adding to the length of course to get you your desired litreage.
 
All boards in the existing range  come with Full Deck Grip. And weigh in at just over 4.5Kgs.
 
Hs foil Wing boards have  increased glide and on water for increased water  pre-take off speeds - allowing a smaller board and smaller foils to be ridden - the increased glide also helps riders run smaller wind wings.
Across the range of hsFoil boards, we'd worked hard To produce the lightest , stiffest and most responsive wing board possible. Our Design reduces swing weight, making our 5'2 ride and feel  more like a 4'6 ... 
 
Biaxial carbon and stiffening HD core adiitions to the EPA foam have been used to maximise stiffness and strength overall while reducing weight. 
 
Gentle roll and 'V' from nose to centre point minimises touch down 'shock' and maximises carving angles.. This board is a no - brainer - its commonsense / proven design is improved dramatically by its low weight / quality components used in its  construction. 
 
Demo one today. The response and light feeling takes a minute to get used too - but you will know the difference